More often than not, you may come across different issues on your Arlo HD camera. In such conditions, you don’t need to get disappointed. We have bought simple troubleshooting steps for you by implementing which you can easily fix almost all the common problems of your Arlo HD camera.
Battery draining quickly: If the battery is exhausting before the actual time limit, then there is a need to contact the Netgear Arlo experts.
Camera Placement: The camera should be placed in a normal traffic area where there is no frequent movement by the things. If the movements are frequent, then the motion sensor will remain active forever and lead to malfunctioning.
Faulty batteries: If the battery is faulty or not working as it should be in normal environmental conditions, then you can contact the Arlo manufacturers and ask for a replacement.
Faulty battery connectors: There are two terminals namely anode or cathode available on the battery. If there is any problem with these terminals, then the battery will drain faster. You can replace the anode or cathode terminal on your own easily after reading the on-screen instructions.
Blurry recording: This happens if there is any moisture content or droplets noticed on the camera lens.
The case is loose: The problem with the case evolves if you remove the batteries and panel and left it as it is. To get this problem resolved, remove the case and left it to get dry overnight.
Protective lens damaged: There is a protective lens installed on the camera in order to keep the lens clean and clear. If the covering of the lens is damaged, you can refer to the guidelines mentioned to replace the protective lens.
The case is cracked: If you find the case of your camera is broken or loose, then remove the batteries from the cover and insert a new case on the camera.
The camera lens is broken: After installing the camera in the right direction, if the picture is still blurry or not clear, then check the camera lens. It might be broken due to some accident. Refer to the instructions mentioned online to replace the broken lens.
Motion sensor doesn’t activate: If you find the motion sensor doesn’t activate even after the motion gets reported, then check the following:
- The lens of the camera is covered with some object or hindrances. Clear the line of sight from the camera lens or move the camera in a different direction.
- The motion sensor if placed in a low traffic area will result in inactivation. Change the direction or placement of your motion sensor and try to turn it on again. See if it is working or not.
Motion sensor not working: After implementing the above-mentioned troubleshooting steps, if the motion sensor is still not working, then replace it on your own or go to a nearby store for a replacement. You can contact the Netgear Arlo experts in this regard.For more information go to Arlo Netgear Login.
